Description
KLOW Blend is a pre-combined, multi-peptide reagent for researchers in Canada working on tissue-repair, inflammation and recovery models who would otherwise be reconstituting and dosing four separate vials. Each vial holds 80mg total of BPC-157, KPV, TB-500 and GHK-Cu as a lyophilized powder, ready for reconstitution in a suitable research solvent. It is sold strictly as a laboratory reagent — not a drug, supplement, food or cosmetic, and not for human or veterinary use.
Overview
The blend brings together four of the more heavily studied peptides in the repair and inflammation literature. BPC-157 and TB-500 are most often paired in tissue-repair research; KPV appears widely in inflammation and mucosal work; GHK-Cu is a copper-binding tripeptide long associated with matrix and skin research. Combining them in a single lyophilized vial means one reconstitution step, one solvent volume and one shared concentration across the panel, which removes a common source of pipetting and dilution error when four reagents are handled separately. Supplied as a single 80mg vial or a box of ten for labs running longer studies or multiple bench users. Every batch is tested independently by Janoshik, a third-party analytical laboratory, for purity by HPLC and identity by mass spectrometry, and the certificate of analysis supplied matches the batch in your hand rather than a representative sample from an earlier lot.
What it is known for
KLOW is known as the shorthand for this specific four-peptide combination — researchers use the name rather than listing the components. Buyers choose it over sourcing the four peptides individually for two reasons: the arithmetic and handling is simpler, and the whole blend arrives with one batch-matched HPLC and mass-spec report instead of four separate documents to reconcile. Batch-level third-party verification is the point of difference most often cited by repeat buyers.
Key features
- Four peptides in one lyophilized vial — BPC-157, KPV, TB-500, GHK-Cu — One reconstitution, one solvent volume and one storage position instead of four, which cuts handling steps and the dilution errors that come with them.
- 80mg total fill per vial — Enough material for extended or repeated in-vitro work without opening a fresh vial mid-study, so conditions stay consistent across a series.
- Supplied lyophilized — The dry powder is far more stable in transit and storage than a solution, and lets the researcher choose the solvent and final concentration the protocol calls for.
- HPLC purity testing by an independent lab — Purity is measured by a party with no commercial stake in the result, so the figure on your COA is something you can cite in a methods section.
- Mass spectrometry identity confirmation — Confirms the material is what the label says — the check that matters most in a multi-component blend, where a single wrong constituent would confound every result.
- Batch-matched certificate of analysis — The document corresponds to the exact lot shipped, which is what an audit, a supervisor or a reviewer will ask for.
- Single vial or box of ten — Buy one for a pilot run, or scale to ten for a longer protocol or a shared bench without changing supplier or lot mid-project.
- Cold storage and discreet tracked shipping within Canada — Domestic dispatch avoids customs holds at the border, and tracking lets you plan the reconstitution around a known arrival date.
Benefits
- One vial, one reconstitution — less bench time and fewer opportunities for measurement error than handling four peptides separately
- Independent purity and identity data on the batch you actually received, not a generic spec sheet
- Consistent constituent ratio across every aliquot drawn from the vial, so results stay comparable within a study
- Dry powder format tolerates shipping and storage better than pre-mixed solutions
- Canadian dispatch with tracking, so material does not sit at a border crossing at ambient temperature
- Ten-vial boxes keep a longer study on a single reproducible supply
Specifications
| Detail | Value |
|---|---|
| Product | KLOW Blend (BPC-157, KPV, TB-500, GHK-Cu) |
| SKU | PP-KLOWBLEND |
| Category | Peptide Blends |
| Total fill | 80mg per vial |
| Sizes available | 80mg single vial; 80mg vials, box of 10 |
| Form | Lyophilized powder for reconstitution |
| Purity testing | HPLC, third-party (Janoshik) |
| Identity testing | Mass spectrometry, third-party (Janoshik) |
| Documentation | Batch-matched certificate of analysis |
| Shipping | Cold-stored, discreet, tracked, shipped from within Canada |
| Classification | Research use only — not for human or veterinary use |
Typical applications
- In-vitro tissue-repair and wound-model research
- Inflammation and cytokine-response studies
- Recovery and regeneration model work
- Comparative studies against single-peptide reagents
- Method development and assay optimization requiring a multi-peptide reference material
Important information
- Research use only. Not a drug, supplement, food or cosmetic. Not for ingestion, administration, or human or veterinary use, and not intended to diagnose, treat, cure or prevent any disease.
- Reconstitute in a solvent appropriate to your protocol and intended assay — the vial is supplied dry so that choice remains with the researcher.
- Store the sealed lyophilized vial cold as received; keep it out of light and avoid repeated temperature cycling.
- Once reconstituted, treat as you would any peptide solution: keep it cold, minimize freeze-thaw cycles, and aliquot if the material will be drawn on repeatedly.
- Request the batch-matched COA and confirm the lot number on the document matches the vial before recording the material in your lab records.
- Because this is a fixed blend, individual constituents cannot be varied or omitted — use single-peptide reagents where a protocol requires isolating one component.
Common questions
What is in KLOW Blend?
Four peptides in one vial: BPC-157, KPV, TB-500 and GHK-Cu, totalling 80mg of lyophilized material, chosen for their complementary roles in tissue-repair, inflammation and recovery research.
Why buy the blend instead of four separate vials?
Handling. One reconstitution, one solvent volume, one storage position and one batch-matched certificate of analysis, rather than four of each. For work where all four are used together at a fixed ratio, it removes several steps where error creeps in.
Is it third-party tested?
Yes. Every batch is tested by Janoshik, an independent analytical laboratory, for purity by HPLC and identity by mass spectrometry. The certificate of analysis provided corresponds to the batch shipped.
How is it supplied and how should it be stored?
As a lyophilized powder in a sealed vial, stored cold and shipped cold, tracked, from within Canada. Keep the unopened vial cold and protected from light until you are ready to reconstitute.
What do I reconstitute it in?
A suitable research solvent for your protocol. It is supplied dry precisely so the solvent and final working concentration are determined by the study rather than by the supplier.
Can this be used in humans or animals?
No. It is sold exclusively as a laboratory research reagent for in-vitro use. It is not a drug, supplement, food or cosmetic, and is not intended for ingestion or administration of any kind.
In summary
An 80mg lyophilized vial containing BPC-157, KPV, TB-500 and GHK-Cu, HPLC- and mass-spec-verified by an independent lab, supplied with a batch-matched COA and shipped cold and tracked within Canada. Available as a single vial or a box of ten. Strictly for in-vitro laboratory research.
Marie Soares –
Wow! worth every penny. No need to take 4 different needles. I love it