Description
Glow Blend is a pre-combined lyophilized reagent bringing together three of the most frequently studied research peptides in Canada for skin, tissue-repair and recovery work: GHK-Cu, BPC-157 and TB-500. Rather than sourcing, weighing and reconstituting three separate vials, a laboratory receives all three in a single 70mg vial produced to a defined specification. It is intended for qualified researchers running in-vitro protocols, not for human or veterinary use.
Overview
Each vial is supplied as a lyophilized (freeze-dried) powder, ready for reconstitution in a suitable research solvent of the investigator’s choosing. Lyophilization is the standard format for peptide reagents because removing water sharply slows the degradation pathways that shorten shelf life in solution, and it gives the researcher full control over final concentration. Glow Blend is available as a single 70mg vial or as a box of ten for laboratories running extended or repeated protocols. Every batch is submitted to Janoshik, an independent analytical laboratory, for purity determination by HPLC and identity confirmation by mass spectrometry, and the matching certificate of analysis is available for the batch you receive. Vials are held cold and shipped discreetly with tracking across Canada.
What it is known for
Glow Blend is known as the combination format for the three peptides that repair and regeneration researchers most often want to study alongside one another. GHK-Cu is the copper tripeptide long associated with skin and extracellular matrix literature; BPC-157 and TB-500 are the two most widely cited compounds in tissue-repair and recovery research. Buyers choose the blend over three separate reagents for consistency between preparations and for the simplicity of a single reconstitution, and they choose it from a Canadian supplier for the batch-matched third-party COA and domestic tracked shipping rather than a customs gamble.
Key features
- GHK-Cu, BPC-157 and TB-500 in one vial — Removes the variability that creeps in when three reagents are weighed and reconstituted separately, so replicate preparations are more comparable to one another.
- 70mg total fill per vial — A working quantity for multi-arm or repeated in-vitro protocols without opening a fresh vial for every run.
- Lyophilized powder format — Stable in storage and shipping compared to a pre-mixed solution, and it lets the researcher set the solvent and final concentration the protocol calls for.
- HPLC purity testing by an independent lab — Purity is quantified by a party with no commercial stake in the result, so the figure on the COA is one you can cite in your own records.
- Mass spectrometry identity confirmation — Confirms the material in the vial is what the label says, which purity testing alone does not establish.
- Batch-matched certificate of analysis — The documentation corresponds to the specific batch shipped to you, not to a representative sample from some earlier production run.
- Cold storage and tracked Canadian shipping — Reagents are kept in condition before dispatch and the shipment stays domestic, avoiding cross-border delays and temperature exposure in transit.
- Single-vial and ten-vial box options — Order to the scale of the work — a pilot experiment or an extended study — without over-committing.
Benefits
- One reagent, one reconstitution, three peptides — less bench handling and fewer opportunities for preparation error
- Independent analytical data available for the exact batch in your hands, supporting internal quality records
- Freeze-dried format gives a practical working life in cold storage and full control over concentration
- Domestic dispatch with tracking means predictable arrival and no international customs handling
- Ten-vial packaging suits laboratories running longer protocols or several parallel workstreams
Specifications
| Detail | Value |
|---|---|
| Product | Glow Blend |
| SKU | PP-GLOWBLEND |
| Category | Peptide Blends |
| Composition | GHK-Cu, BPC-157, TB-500 |
| Total fill | 70mg per vial |
| Sizes available | 70mg (1 vial); 70mg (box of 10) |
| Format | Lyophilized powder for reconstitution |
| Purity testing | HPLC, third-party (Janoshik) |
| Identity testing | Mass spectrometry, third-party (Janoshik) |
| Documentation | Batch-matched certificate of analysis available |
| Shipping | Shipped cold and discreetly from Canada, tracked nationwide |
| Intended use | In-vitro laboratory research only |
Typical applications
- In-vitro skin and dermal research models
- Tissue-repair and wound-healing research
- Recovery and regeneration studies
- Comparative work examining multiple peptides in a single preparation
- Method development and analytical reference work in a laboratory setting
Important information
- Research use only. This product is not a drug, supplement, food or cosmetic, is not intended to diagnose, treat, cure or prevent any disease, and is not for human or veterinary use, ingestion or administration.
- Keep vials cold and protected from light. Reconstituted peptide solutions are less stable than the lyophilized powder — prepare according to your protocol and use within the timeframe your laboratory’s procedures allow.
- Reconstitute using a suitable research solvent selected for your protocol; no diluent is supplied.
- Request the batch-matched certificate of analysis and check that the batch number on the documentation matches the vial you received.
- Handle in accordance with your institution’s laboratory safety procedures and applicable Canadian regulations for research compounds.
- This is a fixed blend. If your protocol requires independent concentration control over each peptide, separate reagents are the appropriate choice.
Common questions
What is actually in Glow Blend?
Three peptides — GHK-Cu, BPC-157 and TB-500 — supplied together as a single 70mg lyophilized fill per vial. They are grouped because they appear together in skin, tissue-repair and recovery research literature.
Who performs the testing?
Janoshik, an independent third-party analytical laboratory, tests each batch for purity by HPLC and confirms identity by mass spectrometry. The certificate of analysis is matched to the batch shipped.
How do I reconstitute it?
The vial contains lyophilized powder only. Reconstitute in a research solvent appropriate to your protocol, at the concentration your method requires. Choice of solvent and volume is the researcher’s decision.
How should the vial be stored?
Store cold and away from light in the lyophilized state. Once reconstituted, stability is reduced, so follow your laboratory’s handling procedures for peptide solutions in solution.
What is the difference between the single vial and the box of ten?
The formulation and fill are identical — 70mg per vial. The box of ten is intended for laboratories running extended or repeated protocols who would otherwise reorder frequently.
Can this be used on people or animals?
No. Glow Blend is supplied strictly for in-vitro laboratory research. It is not a drug, supplement, food or cosmetic and is not intended for human or veterinary administration in any form.
In summary
Three well-studied repair and regeneration peptides in one lyophilized 70mg vial, with independent HPLC and mass spectrometry data tied to the batch you receive and tracked cold-chain dispatch within Canada. Available as a single vial or a box of ten, for qualified laboratory research use only.
Oliver Johnson –
For the price, you really can’t go wrong. took a little longer to get up to me but to be expected with canada post.
Johnathan Rato –
Excellent blend, easier than taking each one individually (less poking). Very happy with it