Description
Adipotide is a research-grade peptidomimetic reagent used in laboratory work on adipose tissue biology and metabolic signalling. It is supplied here as a 10 mg lyophilized vial for reconstitution in the solvent your protocol specifies, and is intended strictly for in-vitro and controlled laboratory research — not for human or veterinary use. For researchers sourcing research peptides in Canada, each lot ships with third-party analytical documentation matched to the vial you receive.
Overview
Adipotide is best known in the literature as a targeted proapoptotic peptidomimetic: a homing sequence directed at prohibitin, a marker associated with the vasculature of white adipose tissue, linked to a proapoptotic D-amino acid segment. That construction is what makes it a subject of interest in metabolic and adipose-vascular research rather than a general-purpose signalling peptide. Pure Peptides Canada supplies it as a lyophilized powder in a sealed vial, available as a single 10 mg vial or as a box of ten vials for multi-arm or repeat-run study designs. Every batch is analyzed by an independent laboratory for purity by HPLC and identity by mass spectrometry, and the corresponding certificate of analysis is available for the batch you are sent.
What it is known for
Adipotide is recognised as one of the reference compounds in adipose-vascular targeting research — the peptidomimetic researchers reach for when the experimental question involves prohibitin-directed targeting rather than a hormonal or receptor-agonist pathway. Buyers choose this listing over unverified sources because the analytical record is batch-matched rather than generic: the HPLC and MS data correspond to the lot in hand, not to a representative sample from an earlier production run. Domestic Canadian dispatch also removes the customs delays and temperature exposure that come with cross-border peptide orders.
Key features
- 10 mg lyophilized powder per vial — Freeze-dried material is stable in storage far longer than a solution, so you control the reconstitution date, the solvent and the working concentration rather than inheriting someone else’s.
- HPLC purity testing on every batch — Chromatographic purity tells you how much of what is in the vial is the intended compound, which is the difference between a reproducible dose-response curve and unexplained variance between runs.
- Mass spectrometry identity confirmation — Purity alone does not prove the sequence is the one on the label. MS confirms molecular identity, so you know the reagent matches the compound your protocol and literature review are built around.
- Batch-matched certificate of analysis — You can cite the specific lot in your methods section and defend the material’s provenance if the work is reviewed, audited or replicated.
- Independent third-party analysis — Testing performed outside the supplying company removes the conflict of interest inherent in self-reported purity numbers.
- Single vial or box of ten — Run a pilot without committing budget, then scale to a full study on the same product line rather than switching sources mid-project and introducing a new variable.
- Cold-held stock, dispatched from within Canada — Shorter transit and no border hold means less time at ambient temperature and fewer delays between order and bench.
- Discreet, tracked nationwide shipping — You can plan around a known arrival window and confirm chain of custody from dispatch to receiving.
Benefits
- Analytical certainty before the first pipette — you know the purity and identity of the exact lot you are working with
- Reproducibility across a study when you order multiple vials from the same product line
- Lower risk of failed or wasted runs caused by misidentified or degraded material
- Documentation that stands up in a lab notebook, a grant report or a peer review
- Faster domestic delivery than importing, with tracking throughout
Specifications
| Detail | Value |
|---|---|
| Product | Adipotide (research reagent) |
| SKU | PP-ADIPOTIDE |
| Format | Lyophilized powder, sealed vial |
| Sizes | 10 mg (1 vial); 10 mg (box of 10) |
| Purity testing | HPLC, independent third-party laboratory |
| Identity testing | Mass spectrometry |
| Documentation | Batch-matched certificate of analysis available |
| Category | Weight Loss & Metabolic research compounds |
| Ships from | Canada, tracked |
| Intended use | Laboratory research use only |
Typical applications
- In-vitro studies of adipose tissue biology and adipose-associated vasculature
- Investigation of prohibitin-directed and homing-peptide targeting strategies
- Metabolic research programs comparing targeted peptidomimetics against other mechanisms
- Method development and analytical work requiring a characterised reference material
- Cell-based assay work in university, biotech and contract research settings
Important information
- For laboratory research use only. This product is not a drug, supplement, food or cosmetic, is not intended to diagnose, treat, cure or prevent any disease, and is not for human or veterinary use, ingestion or administration.
- Store the sealed lyophilized vial cold and protected from light and moisture; keep it in the manufacturer’s vial until you are ready to reconstitute.
- Reconstitute with a solvent appropriate to your protocol and handle the vial under conditions suited to sterile laboratory work. Once in solution, stability is shorter than in powder form — prepare and aliquot according to your own validated procedure.
- Request the certificate of analysis for your batch and file it with your records before beginning work, so your lot number and analytical data stay linked.
- Handle with standard laboratory PPE and dispose of material in line with your institution’s chemical waste procedures.
- Buyers should be qualified research purchasers and are responsible for compliance with the regulations that apply to their facility and jurisdiction.
Common questions
What form does Adipotide arrive in?
As a lyophilized (freeze-dried) powder in a sealed 10 mg vial. It contains no solvent, so you reconstitute it yourself at the concentration your protocol calls for.
Is a certificate of analysis included?
A certificate of analysis matched to your specific batch is available, covering HPLC purity and mass spectrometry identity from an independent third-party laboratory.
Why does third-party testing matter if the supplier already tests?
Independent analysis removes the incentive problem. A lab with no stake in the sale reports what it finds, which is why third-party HPLC and MS data carry more weight in a methods section than in-house numbers.
What is the difference between the single vial and the box of ten?
The contents are identical. A single vial suits a pilot experiment or method development; the box of ten is for extended studies where you want consistent material across every run without reordering mid-project.
How should I store it after it arrives?
Keep the sealed lyophilized vial cold, dry and away from light until use. Lyophilized peptide is considerably more stable than reconstituted solution, so leave it in powder form until the day you need it.
Can this be used in humans or animals?
No. This is a research reagent sold for in-vitro and controlled laboratory research only. It is not approved as a drug or supplement and is not for human or veterinary administration.
Where does it ship from?
From within Canada, shipped discreetly with nationwide tracking, which keeps transit time and temperature exposure lower than importing the same material.
In summary
A characterised, batch-documented Adipotide reagent for laboratories working on adipose tissue and metabolic targeting. Lyophilized 10 mg vials, independent HPLC and MS testing, a certificate of analysis tied to your lot, and Canadian dispatch — the conditions that let a result be trusted and repeated. Research use only.
Reviews
There are no reviews yet.