BPC-157 Capsules

Description

BPC-157 Capsules supply the same research peptide stocked in our lyophilized vial range, portioned into pre-measured 500mcg capsules instead. It is intended for researchers in Canada who want a fixed quantity per unit and a dry, countable format rather than a vial that must be reconstituted before use. It is supplied strictly for in-vitro laboratory research and is not a drug, supplement or consumer product.

Overview

BPC-157 is a synthetic peptide widely referenced in the research literature and studied in laboratory settings for its interaction with tissue-signalling pathways. This listing supplies it as a research reagent already measured into capsules at 500mcg per unit, in bottles of 60 or 100. The distinction from our vial listing matters: a lyophilized vial gives the researcher control over working concentration but requires reconstitution, solvent selection and aliquoting; a capsule fixes the quantity and removes those steps. Every batch is submitted to an independent analytical laboratory for purity by high-performance liquid chromatography (HPLC) and identity by mass spectrometry (MS), with a certificate of analysis matched to the batch you receive. Orders dispatch tracked from within Canada.

What it is known for

Buyers know this listing for the format choice as much as the compound. BPC-157 is one of the most commonly stocked research peptides, and it is almost always sold as lyophilized powder — which means every buyer inherits the reconstitution step whether their protocol needs that flexibility or not. Supplying it pre-measured serves the workflows that do not. The second reason it is chosen is the paperwork: independent HPLC and MS data from an outside lab, matched to the lot in hand rather than to a generic sample document, which is what holds up when a methods section is reviewed.

Key features

• Pre-measured capsule format — Each capsule contains a fixed 500mcg of BPC-157, so the quantity per unit is set at manufacture rather than at the bench. Counting replaces weighing.
• No reconstitution step — There is no solvent to select, no lyophilized powder to weigh and no aliquoting from a stock vial. One of the commonest sources of preparation variability and material loss is removed before the work starts.
• Independent third-party HPLC purity testing — Purity is verified by a laboratory with no commercial stake in the result, which is what gives the figure weight when you cite your reagent source.
• Mass spectrometry identity confirmation — Confirms the material is the compound it is labelled as, not merely that something eluted at the expected purity. Identity and purity answer two different questions and you need both.
• Batch-matched certificate of analysis — The COA corresponds to your specific lot, so your records tie directly to the material used rather than to a generic sample document.
• 60 and 100 capsules per bottle — Bottle counts let you match the quantity ordered to the length of the protocol without over-committing on a pilot or running short mid-study.
• Single bottles or boxes of ten — A single bottle suits exploratory or short work; a box of ten keeps an extended study on one consistent lot, and therefore one certificate of analysis, from start to finish.
• Tracked domestic dispatch from Canada — Shorter transit, no customs queue and a delivery you can follow rather than wait on.

Benefits

• Usable as supplied, with no reconstitution or weighing step to plan around or document
• Fixed content per capsule supports consistency between runs and between operators
• Analytical documentation that matches the lot in hand, ready for your records or review
• A dry, shelf-stable format that does not depend on an unbroken cold chain to remain intact
• Less time in transit and fewer logistics unknowns than an imported reagent
• A supplier reachable in the same country and time zone if a question arises about a batch or a document

Specifications

Detail	Value
SKU	PP-BPC157-CAPS
Compound	BPC-157
Format	Pre-measured capsules in a sealed bottle, no reconstitution required
Sizes	500mcg per capsule; 60 or 100 capsules per bottle
Pack options	Single bottle or box of 10, in each count
Purity testing	HPLC, independent third-party laboratory
Identity testing	Mass spectrometry (MS)
Documentation	Batch-matched certificate of analysis
Category	Capsules
Shipping	Tracked domestic dispatch from Canada
Storage	Sealed, cool and dry, away from light and humidity
Intended use	In-vitro laboratory research only

Typical applications

• In-vitro laboratory research where BPC-157 is the compound under study
• In-vitro work involving tissue-signalling pathways
• Use as a reference or comparison material alongside other research compounds
• Method development and screening work requiring a fixed, pre-measured quantity per unit
• Laboratory workflows where a documented, third-party-tested lot is a requirement of the protocol

Important information

• Research use only. This product is not a drug, supplement, food or cosmetic. It is not intended to diagnose, treat, cure or prevent any disease, and is not for human or veterinary use, ingestion or administration.
• Confirm on receipt that the batch number on the bottle matches the certificate of analysis supplied.
• Store sealed, cool and dry, away from direct light and humidity. Do not transfer capsules to an unsealed or unlabelled container — an unlabelled research material is an untraceable one.
• Purchase is limited to qualified research buyers, institutions and laboratories.
• Check the capsule format is appropriate for your protocol before ordering. If your method requires a defined concentration in solution, or the freedom to set your own working strength, a lyophilized vial is the better-suited format.
• This is a different SKU from our lyophilized BPC-157 vials (PP-BPC157). If your protocol requires you to set your own working concentration, order the vial format instead.

Common questions

How is this different from your BPC-157 vials?

Same compound, different format. The vials (PP-BPC157) are lyophilized powder in 10mg, 20mg or 40mg, reconstituted by the end user at whatever concentration the protocol calls for. These capsules are pre-measured at 500mcg per unit and are supplied dry and ready to count. Choose the vial if you need control over working strength; choose the capsule if you need a fixed, repeatable quantity.

What testing has been done on the batch I receive?

Every batch is submitted to an independent analytical laboratory for purity by high-performance liquid chromatography (HPLC) and identity by mass spectrometry (MS). The certificate of analysis you receive is matched to your specific lot, not to a representative or historical batch.

Can I see the certificate of analysis?

Yes. A batch-matched COA is available for the lot supplied. Request it with your order or afterwards, quoting the batch number printed on the bottle.

Should I order the 60-count or the 100-count bottle?

Both contain the same 500mcg per capsule — only the quantity differs. The 60-count suits a pilot or a short protocol; the 100-count reduces reordering across a longer run. A box of ten in either count keeps a whole study on one lot and one certificate of analysis.

How should it be stored once it arrives?

Keep the bottle sealed, cool, dry and out of direct light. The dry capsule format is considerably more stable than a peptide in solution, but humidity is still the main enemy — close the bottle promptly and do not decant capsules into an unsealed container.

How does it ship, and how long is it in transit?

Orders dispatch tracked from within Canada. Because there is no international border crossing, transit is shorter and there is no customs clearance or brokerage step to add unpredictable delay. You will have tracking to follow the shipment.

Who is allowed to buy this?

Qualified research buyers only — laboratories, universities, biotech companies and researchers purchasing for in-vitro work. It is not sold for human or veterinary use of any kind.

Can this be used on people or animals?

No. It is supplied strictly for in-vitro laboratory research. It is not a drug, supplement, food or cosmetic, and it is not intended for human or veterinary administration of any kind.

In summary

BPC-157 as a pre-measured 500mcg capsule research reagent, in bottles of 60 or 100, third-party tested for purity by HPLC and identity by MS, documented with a certificate of analysis tied to your batch, and dispatched tracked within Canada. Supplied for in-vitro laboratory research only.