Description
Tesofensine is supplied here as a laboratory research compound in pre-measured capsule form rather than as a lyophilized powder. It is intended for researchers in Canada who want a fixed quantity per unit and a countable, shelf-stable format instead of a vial that has to be reconstituted before use. It is supplied strictly for in-vitro laboratory research and is not a drug, supplement or consumer product.
Overview
Tesofensine is a synthetic small-molecule compound referenced in the research literature and studied in laboratory settings for its interaction with monoamine transporter pathways. This listing supplies it as a research reagent already measured into capsules at 500mcg per unit, in bottles of 60 or 100, which removes the weighing and reconstitution steps and the variability that comes with them. Each batch is submitted to an independent analytical laboratory, where purity is assessed by high-performance liquid chromatography (HPLC) and identity is confirmed by mass spectrometry (MS). The certificate of analysis is matched to the batch you receive, not to a representative or historical lot, so the documentation in your file corresponds to the material on your bench. Orders dispatch tracked from within Canada.
What it is known for
Buyers know this item for the pre-measured format and the batch-matched paperwork behind it. Research compounds at the microgram scale are awkward to weigh accurately without an analytical balance, and the error introduced at that step propagates through everything downstream. Fixing the quantity at manufacture removes it. Combined with independent HPLC purity and MS identity testing on the specific lot supplied, it is chosen by researchers who need the analytical trail to hold up when the work is reviewed, and by Canadian labs who would rather not have a reagent order sitting in a customs queue.
Key features
- Pre-measured capsule format — Each capsule contains a fixed 500mcg of Tesofensine, so the quantity per unit is set at manufacture rather than at the bench. Counting replaces weighing.
- No reconstitution step — There is no solvent to select, no lyophilized powder to weigh and no aliquoting from a stock vial. One of the commonest sources of preparation variability and material loss is removed before the work starts.
- Independent third-party HPLC purity testing — Purity is verified by a laboratory with no commercial stake in the result, which is what gives the figure weight when you cite your reagent source.
- Mass spectrometry identity confirmation — Confirms the material is the compound it is labelled as, not merely that something eluted at the expected purity. Identity and purity answer two different questions and you need both.
- Batch-matched certificate of analysis — The COA corresponds to your specific lot, so your records tie directly to the material used rather than to a generic sample document.
- 60 and 100 capsules per bottle — Bottle counts let you match the quantity ordered to the length of the protocol without over-committing on a pilot or running short mid-study.
- Single bottles or boxes of ten — A single bottle suits exploratory or short work; a box of ten keeps an extended study on one consistent lot, and therefore one certificate of analysis, from start to finish.
- Tracked domestic dispatch from Canada — Shorter transit, no customs queue and a delivery you can follow rather than wait on.
Benefits
- Usable as supplied, with no reconstitution or weighing step to plan around or document
- Fixed content per capsule supports consistency between runs and between operators
- Analytical documentation that matches the lot in hand, ready for your records or review
- A dry, shelf-stable format that does not depend on an unbroken cold chain to remain intact
- Less time in transit and fewer logistics unknowns than an imported reagent
- A supplier reachable in the same country and time zone if a question arises about a batch or a document
Specifications
| Detail | Value |
|---|---|
| SKU | PP-TESOFENSINE |
| Compound | Tesofensine |
| Format | Pre-measured capsules in a sealed bottle, no reconstitution required |
| Sizes | 500mcg per capsule; 60 or 100 capsules per bottle |
| Pack options | Single bottle or box of 10, in each count |
| Purity testing | HPLC, independent third-party laboratory |
| Identity testing | Mass spectrometry (MS) |
| Documentation | Batch-matched certificate of analysis |
| Category | Capsules |
| Shipping | Tracked domestic dispatch from Canada |
| Storage | Sealed, cool and dry, away from light and humidity |
| Intended use | In-vitro laboratory research only |
Typical applications
- In-vitro laboratory research where Tesofensine is the compound under study
- In-vitro work involving monoamine transporter pathways
- Use as a reference or comparison material alongside other research compounds
- Method development and screening work requiring a fixed, pre-measured quantity per unit
- Laboratory workflows where a documented, third-party-tested lot is a requirement of the protocol
Important information
- Research use only. This product is not a drug, supplement, food or cosmetic. It is not intended to diagnose, treat, cure or prevent any disease, and is not for human or veterinary use, ingestion or administration.
- Confirm on receipt that the batch number on the bottle matches the certificate of analysis supplied.
- Store sealed, cool and dry, away from direct light and humidity. Do not transfer capsules to an unsealed or unlabelled container — an unlabelled research material is an untraceable one.
- Purchase is limited to qualified research buyers, institutions and laboratories.
- Check the capsule format is appropriate for your protocol before ordering. If your method requires a defined concentration in solution, or the freedom to set your own working strength, a lyophilized vial is the better-suited format.
Common questions
Why capsules rather than a lyophilized vial?
The capsule fixes the quantity per unit at manufacture, so the material arrives countable rather than requiring weighing on an analytical balance. For workflows that call for a repeated fixed quantity, that is simpler and more repeatable than subdividing a vial. The format describes how the material is portioned in the lab; it is not an indication of use in humans.
What testing has been done on the batch I receive?
Every batch is submitted to an independent analytical laboratory for purity by high-performance liquid chromatography (HPLC) and identity by mass spectrometry (MS). The certificate of analysis you receive is matched to your specific lot, not to a representative or historical batch.
Can I see the certificate of analysis?
Yes. A batch-matched COA is available for the lot supplied. Request it with your order or afterwards, quoting the batch number printed on the bottle.
Should I order the 60-count or the 100-count bottle?
Both contain the same 500mcg per capsule — only the quantity differs. The 60-count suits a pilot or a short protocol and keeps unused material to a minimum; the 100-count reduces reordering across a longer run. A box of ten in either count keeps a whole study on one lot and one certificate of analysis.
How should it be stored once it arrives?
Keep the bottle sealed, cool, dry and out of direct light. The dry capsule format is considerably more stable than a peptide in solution, but humidity is still the main enemy — close the bottle promptly and do not decant capsules into an unsealed container.
How does it ship, and how long is it in transit?
Orders dispatch tracked from within Canada. Because there is no international border crossing, transit is shorter and there is no customs clearance or brokerage step to add unpredictable delay. You will have tracking to follow the shipment.
Who is allowed to buy this?
Qualified research buyers only — laboratories, universities, biotech companies and researchers purchasing for in-vitro work. It is not sold for human or veterinary use of any kind.
Can this be used on people or animals?
No. It is supplied strictly for in-vitro laboratory research. It is not a drug, supplement, food or cosmetic, and it is not intended for human or veterinary administration of any kind.
In summary
A Tesofensine research compound in a pre-measured 500mcg capsule format, in bottles of 60 or 100, third-party tested for purity by HPLC and identity by MS, documented with a certificate of analysis tied to your batch, and dispatched tracked within Canada. Supplied for in-vitro laboratory research only.
Reviews
There are no reviews yet.