Description
5-Amino-1MQ Capsules supply the same research compound stocked in our lyophilized vial range, portioned into pre-measured 50mg capsules instead. It is intended for researchers in Canada who want a fixed quantity per unit in a dry, countable format rather than a vial requiring reconstitution. It is supplied strictly for in-vitro laboratory research and is not a drug, supplement or consumer product.
Overview
5-Amino-1MQ is a synthetic small-molecule compound referenced in the research literature and studied in laboratory settings for its interaction with methyltransferase enzyme pathways. This listing supplies it as a research reagent already measured into capsules at 50mg per unit, 60 per bottle. At 50mg the quantity per unit is large enough to weigh accurately by hand, so the case for the capsule format here is less about precision than about consistency and convenience: the same quantity, prepared the same way, every time, without opening a stock vial. Every batch is submitted to an independent analytical laboratory for purity by high-performance liquid chromatography (HPLC) and identity by mass spectrometry (MS), with a certificate of analysis matched to the batch you receive. Orders dispatch tracked from within Canada.
What it is known for
Buyers know this listing for being the practical counterpart to our vial format. The vials (PP-5AMINO1MQ) are supplied in 10mg and 50mg and suit work where the researcher sets the working concentration; the capsule suits repeat work at a fixed quantity where re-weighing each time adds nothing. Independent HPLC purity and MS identity testing on the specific lot supplied applies to both, and the certificate of analysis is matched to your batch rather than to a representative sample.
Key features
- Pre-measured capsule format — Each capsule contains a fixed 50mg of 5-Amino-1MQ, so the quantity per unit is set at manufacture rather than at the bench. Counting replaces weighing.
- No reconstitution step — There is no solvent to select, no lyophilized powder to weigh and no aliquoting from a stock vial. One of the commonest sources of preparation variability and material loss is removed before the work starts.
- Independent third-party HPLC purity testing — Purity is verified by a laboratory with no commercial stake in the result, which is what gives the figure weight when you cite your reagent source.
- Mass spectrometry identity confirmation — Confirms the material is the compound it is labelled as, not merely that something eluted at the expected purity. Identity and purity answer two different questions and you need both.
- Batch-matched certificate of analysis — The COA corresponds to your specific lot, so your records tie directly to the material used rather than to a generic sample document.
- 60 capsules per bottle — Bottle counts let you match the quantity ordered to the length of the protocol without over-committing on a pilot or running short mid-study.
- Single bottles or boxes of ten — A single bottle suits exploratory or short work; a box of ten keeps an extended study on one consistent lot, and therefore one certificate of analysis, from start to finish.
- Tracked domestic dispatch from Canada — Shorter transit, no customs queue and a delivery you can follow rather than wait on.
Benefits
- Usable as supplied, with no reconstitution or weighing step to plan around or document
- Fixed content per capsule supports consistency between runs and between operators
- Analytical documentation that matches the lot in hand, ready for your records or review
- A dry, shelf-stable format that does not depend on an unbroken cold chain to remain intact
- Less time in transit and fewer logistics unknowns than an imported reagent
- A supplier reachable in the same country and time zone if a question arises about a batch or a document
Specifications
| Detail | Value |
|---|---|
| SKU | PP-5AMINO1MQ-CAPS |
| Compound | 5-Amino-1MQ |
| Format | Pre-measured capsules in a sealed bottle, no reconstitution required |
| Sizes | 50mg per capsule; 60 capsules per bottle |
| Pack options | Single bottle or box of 10 |
| Purity testing | HPLC, independent third-party laboratory |
| Identity testing | Mass spectrometry (MS) |
| Documentation | Batch-matched certificate of analysis |
| Category | Capsules |
| Shipping | Tracked domestic dispatch from Canada |
| Storage | Sealed, cool and dry, away from light and humidity |
| Intended use | In-vitro laboratory research only |
Typical applications
- In-vitro laboratory research where 5-Amino-1MQ is the compound under study
- In-vitro work involving methyltransferase enzyme pathways
- Use as a reference or comparison material alongside other research compounds
- Method development and screening work requiring a fixed, pre-measured quantity per unit
- Laboratory workflows where a documented, third-party-tested lot is a requirement of the protocol
Important information
- Research use only. This product is not a drug, supplement, food or cosmetic. It is not intended to diagnose, treat, cure or prevent any disease, and is not for human or veterinary use, ingestion or administration.
- Confirm on receipt that the batch number on the bottle matches the certificate of analysis supplied.
- Store sealed, cool and dry, away from direct light and humidity. Do not transfer capsules to an unsealed or unlabelled container — an unlabelled research material is an untraceable one.
- Purchase is limited to qualified research buyers, institutions and laboratories.
- Check the capsule format is appropriate for your protocol before ordering. If your method requires a defined concentration in solution, or the freedom to set your own working strength, a lyophilized vial is the better-suited format.
- This is a different SKU from our lyophilized 5-Amino-1MQ vials (PP-5AMINO1MQ). If your protocol requires you to set your own working concentration, order the vial format instead.
Common questions
How is this different from your 5-Amino-1MQ vials?
Same compound, different format. The vials (PP-5AMINO1MQ) are lyophilized powder in 10mg or 50mg, reconstituted by the end user. These capsules are pre-measured at 50mg per unit and supplied dry. Choose the vial if you need control over working strength; choose the capsule if you need a fixed, repeatable quantity.
What testing has been done on the batch I receive?
Every batch is submitted to an independent analytical laboratory for purity by high-performance liquid chromatography (HPLC) and identity by mass spectrometry (MS). The certificate of analysis you receive is matched to your specific lot, not to a representative or historical batch.
Can I see the certificate of analysis?
Yes. A batch-matched COA is available for the lot supplied. Request it with your order or afterwards, quoting the batch number printed on the bottle.
Is this a peptide?
No. 5-Amino-1MQ is a small molecule, not a peptide. It sits in this catalogue alongside peptide reagents because of the research area it is associated with, and it does not require cold-chain handling in the dry capsule format.
How should it be stored once it arrives?
Keep the bottle sealed, cool, dry and out of direct light. The dry capsule format is considerably more stable than a peptide in solution, but humidity is still the main enemy — close the bottle promptly and do not decant capsules into an unsealed container.
How does it ship, and how long is it in transit?
Orders dispatch tracked from within Canada. Because there is no international border crossing, transit is shorter and there is no customs clearance or brokerage step to add unpredictable delay. You will have tracking to follow the shipment.
Who is allowed to buy this?
Qualified research buyers only — laboratories, universities, biotech companies and researchers purchasing for in-vitro work. It is not sold for human or veterinary use of any kind.
Can this be used on people or animals?
No. It is supplied strictly for in-vitro laboratory research. It is not a drug, supplement, food or cosmetic, and it is not intended for human or veterinary administration of any kind.
In summary
5-Amino-1MQ as a pre-measured 50mg capsule research reagent, 60 per bottle, third-party tested for purity by HPLC and identity by MS, documented with a certificate of analysis tied to your batch, and dispatched tracked within Canada. Supplied for in-vitro laboratory research only.
Reviews
There are no reviews yet.